- < Back
- < Back
- < Back
- Retailers service
- Stays service
APC
APC
APC1 is a two-handed invisible screw fixing cabinet hanger. APC1 requires a simple installation, without any pre-drilling operations.
It can be installed on cabinets with a minimum sanitary gap of 16 mm.
APC1 allows a vertical adjustment up to 18 mm and an in-depth adjustment of maximum 31 mm.
The adjustments can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.
Also featured in the APC family are 1 type of wall plate and 2 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions.
Wall bars and wall plates feature oval holes which facilitate the correct positioning and give possibility to carry out the horizontal adjustment.
Also available 2 different cover caps: one round version for Ø 20 mm hole and one square version for double Ø 12 mm holes.
APC6 is a left/right invisible cabinet hanger with 2 semi-circular pins Ø 15 mm especially conceived for automatic assembly.
APC6 grants high performances even without its fixing on the top panel. It can be installed on cabinets with side panels of minimum 16 mm and with a minimum sanitary gap of 16 mm.
APC6 allows a vertical adjustment up to 18 mm and an in-depth adjustment of maximum 31 mm. The adjustments can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.
Also featured in the APC family are 1 type of wall plate and 2 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give possibility to carry out the horizontal adjustment.
Also available 2 different cover caps: one round version for Ø 20 mm hole and one square version for double Ø 12 mm holes.
It can be installed on cabinets with a minimum sanitary gap of 16 mm.
APC1 allows a vertical adjustment up to 18 mm and an in-depth adjustment of maximum 31 mm.
The adjustments can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.
Also featured in the APC family are 1 type of wall plate and 2 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions.
Wall bars and wall plates feature oval holes which facilitate the correct positioning and give possibility to carry out the horizontal adjustment.
Also available 2 different cover caps: one round version for Ø 20 mm hole and one square version for double Ø 12 mm holes.
APC6 is a left/right invisible cabinet hanger with 2 semi-circular pins Ø 15 mm especially conceived for automatic assembly.
APC6 grants high performances even without its fixing on the top panel. It can be installed on cabinets with side panels of minimum 16 mm and with a minimum sanitary gap of 16 mm.
APC6 allows a vertical adjustment up to 18 mm and an in-depth adjustment of maximum 31 mm. The adjustments can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.
Also featured in the APC family are 1 type of wall plate and 2 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give possibility to carry out the horizontal adjustment.
Also available 2 different cover caps: one round version for Ø 20 mm hole and one square version for double Ø 12 mm holes.
FEATURES AND BENEFITS
AUTOMATIC ASSEMBLY
especially conceived for the automatic installation on the cabinet
WIDE ADJUSTMENT RANGE
vertical and in-depth adjustments
ONE COVER CAP
only one hole is needed to provide access to all adjustments
Product details APC1 >
Product details APC6 >
especially conceived for the automatic installation on the cabinet
WIDE ADJUSTMENT RANGE
vertical and in-depth adjustments
ONE COVER CAP
only one hole is needed to provide access to all adjustments
Product details APC1 >
Product details APC6 >