APC4 is a left/right invisible cabinet hanger with 3 semi-circular pins Ø 10 mm.
APC4 is to be used only on those cabinets where the top panel is flushing with the back panel.
APC4 can be installed on cabinets with side panels of minimum 15 mm and with a minimum sanitary gap of 16 mm.
APC4 allows a vertical adjustment up to 18 mm and an in-depth adjustment of maximum 31 mm.
The adjustments can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.
Also featured in the APC family are 2 types of wall plates and 2 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions.
Wall bars and wall plates feature oval holes which facilitate the correct positioning and give possibility to carry out the horizontal adjustment.
Also available 2 different cover caps: one round version for Ø 20 mm hole and one square version for double Ø 12 mm holes.
FEATURES AND BENEFITS
LOADING CAPACITY: 90 kg per piece.
WIDE ADJUSTMENT RANGE: vertical and in-depth adjustments.
ONE COVER CAP: only one hole is needed to provide access to all adjustments.