The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet. All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent. LIBRA H6 is a very resistant and reliable solution for suspended base units as the zinc alloy body is sensibly thicker, and therefore stronger. LIBRA H6 is a left/right cabinet hanger with two semi-circular pins Ø15mm and a pre-inserted screw for the top. It features an innovative locking device to the side panel conceived to sensibly increase the capacity loading of the cabinet. The axial-locking of LIBRA H6 allows the fixing screw to penetrate the side panel beyond the back panel groove. Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient. The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.