APC6 is a left/right invisible cabinet hanger with 2 semi-circular pins Ø 15 mm especially conceived for automatic assembly. APC6 grants high performances even without its fixing on the top panel. It can be installed on cabinets with side panels of minimum 16 mm and with a minimum sanitary gap of 16 mm. APC6 allows a vertical adjustment up to 18mm and an in-depth adjustment of maximum 31 mm. The adjustments can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver. Also featured in the APC family are 1 type of wall plate and 2 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions. Wall bars and wall plates feature oval holes which facilitate the correct positioning and give possibility to carry out the horizontal adjustment. Also available 2 different cover caps: one round version for Ø 20 mm hole and one square version for double Ø 12 mm holes. FEATURES AND BENEFITS LOADING CAPACITY: 65 kg per piece. AUTOMATIC ASSEMBLY: especially conceived for the automatic installation on the cabinet. WIDE ADJUSTMENT RANGE: vertical and in-depth adjustments. ONE COVER CAP: only one hole is needed to provide access to all adjustments.