INTEGRATO is a complete family of levellers suitable to align heavy duty wardrobes, bookcases and modular furniture. The leveller is installed and safely fixed onto the bottom of the carcase through a wide range of supports such as pins and screw holes, spikes and screw holes or just screw holes. A further securement in position can be obtained with a countersunk 4x18mm length screw from underneath first and then with two panhead 3,5x15mm length screws from the side if required. The adjustment of the leveller can be carried out from above through a Ø8mm hole on the bottom panel, by using a S6mm allen wrench or both cross and blade screwdriver. The zinc alloy die-cast foot is provided with an indipendent engineering plastic glide in order to make the adjustment easier and to prevent the scratching of the floor. A bespoke spacer can be slotted over the leveller to give an extra structural support to the furniture bottom. The spacer is available in three heights (see the related page). INTEGRATO levellers are available with 12 mm adjustment and 25 mm adjustment, with main body in zinc alloy or with engineering plastic. In any case, all versions of INTEGRATO are capable of supporting a 175 kg load each.